Evaluation of Pavement Roughness and Vehicle Vibrations for Road Surface Profiling

The research explores aspects of road surface measurement and monitoring, targeting some of the main challenges in the field, including cost and portability of high-speed inertial profilers. These challenges are due to the complexities of modern profilers to integrate various sensors while using advanced algorithms and processes to analyse measured sensor data. Novel techniques were proposed to improve the accuracy of road surface longitudinal profiles using inertial profilers. The thesis presents a Half-Wavelength Peak Matching (HWPM) model, designed for inertial profilers that integrate a laser displacement sensor and an accelerometer to evaluate surface irregularities. The model provides an alternative approach to drift correction in accelerometers, which is a major challenge when evaluating displacement from acceleration. The theory relies on using data from the laser displacement sensor to estimate a correction offset for the derived displacement. The study also proposes an alternative technique to evaluating vibration velocity, which improves on computational factors when compared to commonly used methods. The aim is to explore a different dimension to road roughness evaluation, by investigating the effect of surface irregularities on vehicle vibration. The measured samples show that the drift in the displacement calculated from the accelerometer increased as the vehicle speed at which the road measurement was taken increased. As such, the significance of the HWPM model is more apparent at higher vehicle speeds, where the results obtained show noticeable improvements to current techniques. All results and analysis carried out to validate the model are based on real-time data obtained from an inertial profiler that was designed and developed for the research. The profiler, which is designed for portability, scalability and accuracy, provides a Power Over Ethernet (POE) enabled solution to cope with the demand for high data transmission rates.

Development of a vibration measurement device based on a MEMS accelerometer

© 2017 by SCITEPRESS. Published under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International licence (CC BY-NC-ND 4.0: https://creativecommons.org/licenses/by-nc-nd/4.0/)This paper proposes a portable and low cost vibration detection device. Enhanced vibration calculation, reduction of error and low storage memory are complementary accomplishments of this research. The device consists of a MEMS capacitive accelerometer sensor and microcontroller unit, which operates based on a novel algorithm designed to obtained vibration velocity, bypassing the usual time-based integration process. The proposed algorithm can detect vibrations within 15Hz-1000Hz frequencies. Vibration in this frequency range cannot be easily and accurately evaluated with conventional low cost digital sensors. The proposed technique is assessed and validated by comparing results with an industrial grade vibration meter

Improving Displacement Measurement for Evaluating Longitudinal Road Profiles

2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.This paper introduces a half-wavelength peak matching (HWPM) model, which improves the accuracy of vehicle based longitudinal road profilers used in evaluating road unevenness and mega-textures. In this application, the HWPM model is designed for profilers which utilize a laser displacement sensor with an accelerometer for detecting surface irregularities. The process of converting acceleration to displacement by double integration (which is used in most rofilers) is error-prone, and although there are techniques to minimize the effect of this error, this paper proposes a novel approach for improving the generated road profile results. The technique amends the vertical displacement derived from the accelerometer samples, by using data from the laser displacement sensor as a reference. The vehicle based profiler developed for this experiment (which uses the HWPM model) shows a huge improvement in detected longitudinal irregularities when compared with pre-processed results, and uses a 3-m rolling straight edge as a benchmark.Peer reviewe